Error Code E It
In-door Icemaker Kit Error — electrical system error (motor, gear, Hall IC, operation circuit) within in-door icemaker
Moderate
Address soon - your appliance may not work properly
Also displayed as: E It
How to Fix
- 1
Press the I/M Test Switch. If ice does not drop, the icemaker kit is suspect.
- 2
Check electrical connections and harness to the icemaker.
- 3
Measure resistance of icemaker motor windings (U, V, W phases at CON1 pins 25~27, 25~28, 27~28; expected 2.37~2.73 ohm each).
- 4
If resistance is out of range, replace the icemaker dispenser assembly.
- 5
Check Hall IC signal. If no Hall IC feedback, replace the icemaker kit.
- 6
If all icemaker internals pass, check main PCB output voltages.
- 7
Replace icemaker kit if motor or gear mechanism is determined to be faulty.
Other Error Codes for LRMDC2306S
Freezer Sensor Error — short or open circuit in the freezer thermistor
Refrigerator Sensor Error — short or open circuit in the fresh food compartment thermistor
Freezer Defrost Sensor Error — short or open circuit in the freezer defrost sensor
Refrigerator Defrost Sensor Error — short or open circuit in the refrigerator defrost sensor
Convertible (Pantry/Full Convert) Sensor Error — short or open circuit in the pantry drawer sensor
Room Temperature Sensor Error — short or open circuit in the ambient room temperature sensor
Icing Sensor Error — short or open circuit in the icing compartment (in-door icemaker) sensor
Flow Meter Sensor Error — defective flow meter, water motor error, or low water pressure